A package here is custom-designed rather than picked off a list: a design consultation, a lighting design for the rooms and outdoor areas that matter, supply from one matched 24V component system, then installation of the mains side by a licensed electrician. That is the honest description while no tier, inclusion list or bundle price exists anywhere. It also fits this part of Brisbane better than a boxed kit would, because the area is not internally uniform - some of its districts are overwhelmingly detached and two-car, others carry a far higher share of flats - so the system stays constant and the specification moves. Luxe designs, supplies and installs across Brisbane, with the installer travelling from the Buderim premises. Electricians, builders and shopfitters take the same consultation route, for trade pricing and bulk supply.
Licensed Electrical Contractor
LED Strip Lighting Packages North Brisbane
One matched 24V system, specified address by address, with the mains side installed under Electrical Contractor Licence #90549.
Ask what north Brisbane means and four official bodies give four different answers - so this page says which one it means: the statistical area the ABS calls Brisbane - North, whose 25 component areas all sit inside Brisbane City. Luxe Lighting designs, supplies and installs LED strip lighting there, and across the rest of Brisbane with it. There are no tiers to choose from. A package here is a consultation, a lighting design, supply from one matched 24V system of strips, profiles, drivers and controls, then licensed installation of the mains side. Most of that work is retrofit into a house someone is already living in. Lighting quotes are free and pricing is upfront. Book the design consultation.
Licensed contractor · Free quotes, upfront pricing · Most installs done in a day
Professional Grade Systems
Australian Owned & Operated
Trade Ready Systems
Why this service matters in North Brisbane
Common problems we solve
The six ways strip lighting projects go wrong — and how a designed package avoids each one.
-
You searched for north Brisbane and cannot tell whether your address is in the area this page is talking about
Why it happens
Four official bodies use these words for four different areas. Only the ABS's Brisbane - North stops at the Brisbane City line; a Commonwealth health network, a Queensland Health service and a police district all draw it wider, and Brisbane City Council publishes no such area at all.
Why it matters
A reader in the inner north or around The Gap, Enoggera or Upper Kedron would call themselves a northsider and would be right, but the ABS puts them in different statistical areas - so a figure quoted for this page does not describe their suburb, even though the service area still covers them.
Our response
The boundary is stated rather than assumed: the figures on this page are the ABS's Brisbane - North and the component areas are named in the FAQs. Coverage is separate and wider - Luxe designs, supplies and installs across Brisbane.
-
There is nothing to compare - no tiers, no inclusions list, no bundle price
Why it happens
No tier list, inclusion list or bundle price is published anywhere, and the packages collection is still marked as coming soon. The only published figures are individual component prices.
Why it matters
Without tiers you cannot shortlist by price, and there is no honest way to name a package price before the design exists. That matters more here than in a uniform suburb, because the right specification genuinely changes between one district and the next.
Our response
The package is designed before it is priced: consultation, lighting design, supply from the matched 24V system, then licensed installation. The prices that exist are real and each is attached to the part it buys: $175 for the 10x10 warm white free-cut Signature side-emitting strip, $350 for the top-emitting version of the same strip, $325 for the 16x16 RGBW+3000K Signature side-emitting strip and $140 for the 100W dimmable 24V driver, as displayed at the time of writing.
-
Fitting strip lighting into a house that is already finished and lived in
Why it happens
This is an established area, not a growth corridor. Its population grew about 7.1% between June 2021 and June 2025 against 8.9% for Brisbane City, and 86,969 dwellings were already standing at the 2021 Census, 69.2% of them separate houses.
Why it matters
A retrofit is a different job from a fitout. Joinery is closed, ceilings are sheeted, circuits already exist and someone is living in the rooms while the work happens - which is where damage, mismatched later stages and unplanned rewiring come from.
Our response
The design is drawn for the whole property first and installed in stages from the same 24V component system, so a stage fitted later still matches the first. The business states most residential feature lighting installs are completed within a single day once the design is settled.
-
Strips, profiles, drivers and controllers bought separately refuse to work together
Why it happens
Online LED parts come from different ecosystems with different voltages, channel sizes and control protocols, so a strip bought one month rarely matches a profile or a driver bought the next.
Why it matters
Mismatched parts mean visible joins, strip that will not sit in its channel, undersized drivers and scenes that cannot be run together - and on a staged retrofit the mismatch only shows up on the second stage.
Our response
The Luxe range is one 24V DC system: Signature strips pair with matching Signature aluminium profiles (10x10 strip to 10x10 profile, 16x16 to 16x17), share 24V drivers, and sit on a single WiFi and 2.4G control layer that also runs the 24V garden lights.
-
Assuming that because the strip runs at low voltage, the whole job is a DIY job
Why it happens
Strip lighting is sold as a consumer product, and the Electrical Safety Act 2002 (Qld) does carry exclusions: section 18(2)(p) for connecting an item of prescribed electrical equipment to existing equipment, and section 18(2)(q) for disconnecting it - each only where the task can be safely performed by someone without expertise in electrical work and the equipment stays at extra low voltage.
Why it matters
The mains side is not covered by either limb. Hardwiring a 24V driver into a circuit, fitting a dimmer, adding a lighting circuit or touching a switchboard is electrical work under the Act, and Queensland requires an electrical contractor licence where that work is carried out as part of a business.
Our response
Luxe splits the job at that line and carries out the licensed side through the trade arm under Electrical Contractor Licence #90549, a state register entry a customer can check before booking.
-
Wanting the same strip run outside - along the eaves, down the steps, through the garden
Why it happens
Exterior lighting is the outcome people remember; one customer said an external job 'completely changed the look', and the published showcases include tree, step and outdoor seating work. Strip therefore looks like an anywhere product.
Why it matters
An IP rating is a formal classification under IEC 60529 that a product either carries as a tested result or does not. In this range only the drivers carry one - IP20 on the 100W dimmable, IP67 on the 200W non-dimmable - and that rating belongs to those enclosures alone, not to strips, profiles, controllers, remotes or garden lights. The northern edge of this area runs to the bay at Sandgate, Shorncliffe, Brighton, Deagon and Nudgee, where salt-laden air punishes anything unrated.
Our response
Outdoor work is specified instead with the dedicated 9W and 6W DC24V RGB+CCT garden lights and fixture work, which run on the same 24V control layer as the interior strips.
-
A workshop, showroom or shopfront gets quoted as though it were a living room
Why it happens
The working side of this area is unusually large. By the ABS's mesh-block land-use classification, 21.8 square kilometres of industrial-category land and 4.7 of commercial-category land sit inside it - 24.5% of all Brisbane City's industrial-category land against 13.9% of the city's area. Close to half of that industrial land is inside the Brisbane Airport statistical area, though, so the share describing the rest of the sub-region is about 13%, not a quarter.
Why it matters
Commercial premises need different run lengths, different mounting, different control zones and often out-of-hours access, and a signage or shopfront brief is a fabrication job before it is a lighting job.
Our response
Trade pricing, bulk supply and bookable lighting consultations run for electricians and builders, and custom signage and neon lighting already runs as a made-to-order service - brief, quote, build, install - with published case studies.
What's included in a North Brisbane package
Every package is custom-designed — the design is the product, not a preset tier.
-
Lighting Design Consultation
A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.
Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.
-
24V LED Strip Supply
Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.
One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.
-
Licensed Installation
Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.
Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.
-
Trade Supply for Builders & Electricians
The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.
A repeat builder client describes multiple projects delivered 'on-time and on-budget'.
-
Smart LED Garden Lights
9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.
Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.
Shop by Category
LED Strip Lighting
Garden Lighting
Controllers
LED Extrusions
LED Drivers
Packages
Why trust Luxe Lighting
Areas we cover around North Brisbane
Installation runs across North Brisbane and the surrounding areas, with the wider region also served.
Frequently asked questions
Is my suburb actually in north Brisbane?
It depends whose north Brisbane you mean, which is why this page states one and keeps to it. The figures here are the ABS statistical area called Brisbane - North, made up of 25 smaller areas: Bald Hills, Bridgeman Downs, Carseldine, Everton Park and McDowall; Aspley, Chermside, Chermside West, Geebung, Kedron - Gordon Park, Stafford, Stafford Heights and Wavell Heights; Boondall, Northgate - Virginia, Nudgee - Banyo and Nundah, plus the largely non-residential Brisbane Airport and Eagle Farm - Pinkenba areas; and Bracken Ridge, Brighton, Deagon, Sandgate - Shorncliffe, Taigum - Fitzgibbon and Zillmere. These are statistical areas rather than suburb boundaries, so treat them as 'the Chermside area' or 'around Sandgate'. The ABS line leaves out the inner north and The Gap, Enoggera and Upper Kedron - those readers are outside these statistics but not outside the service area, which is Brisbane.
What is actually in a custom LED strip lighting package, and what does it cost?
There are no fixed tiers and no bundle price to quote. A package is a design consultation, a lighting design, supply from the matched 24V component system (Signature strips, matching Signature aluminium profiles, shared 24V drivers and a WiFi and 2.4G control layer), then licensed installation of the mains side. Cost follows the design, which is the honest answer in an area whose districts are genuinely different from one another. The component prices that are published are real, and each belongs to one part rather than to a tier: $175 for the 10x10 warm white free-cut Signature side-emitting strip, $350 for the top-emitting version of the same strip, $325 for the 16x16 RGBW+3000K Signature side-emitting strip and $140 for the 100W dimmable 24V driver, as displayed at the time of writing.
Do you install across Brisbane's northern suburbs?
Yes. Luxe designs, supplies and installs across Brisbane, and 'Brisbane' is named in the trade site's published service statements. The installer travels from the business premises at 5/13 Kayleigh Dr, Buderim. There is no office, depot, showroom or local crew anywhere in the city's north, and no coverage radius, travel time or response time is published anywhere. What is published is a bookable lighting consultation and a free lighting quote with upfront pricing - ask for both when you enquire about your address.
We are renovating rather than building. Does that change the job?
Yes, and it is the normal case here. This part of Brisbane grew about 7.1% between June 2021 and June 2025, against 8.9% for Brisbane City, with 86,969 dwellings already standing at the 2021 Census. So the work is retrofit: cutting into finished joinery instead of pre-wiring an open ceiling, working with circuits that already exist, and staging around a household that has not moved out. The design is drawn once for the whole property and installed in stages from the same 24V system, so a later stage still matches the first, and the business states most residential feature lighting installs are completed within a single day once the design is settled.
Can I install LED strip lighting myself?
Partly, and the detail matters. Under the Electrical Safety Act 2002 (Qld), electrical work includes connecting supply wiring to equipment and installing, altering or repairing an electrical installation - so hardwiring a 24V driver into a circuit, fitting a dimmer, adding a lighting circuit or any switchboard work is licensed work. The Act sets out exclusions at section 18(2)(p) for connecting an item of prescribed electrical equipment to existing equipment and at section 18(2)(q) for disconnecting it, each applying only where the task can be safely performed by a person without expertise in electrical work and the equipment remains, or was, operating at extra low voltage. Queensland also requires an electrical contractor licence where electrical work is carried out as part of a business. Luxe carries out the licensed side under Electrical Contractor Licence #90549. If you are a licensed electrician, trade supply is the other path.
Can I run LED strip outside, along the eaves or through the garden?
No. An IP rating is a formal classification under IEC 60529, which a product either carries as a tested result or does not. In this range only the drivers carry one - IP20 on the 100W dimmable unit and IP67 on the 200W non-dimmable unit - and a driver's rating belongs to that enclosure alone, not to strips, profiles, controllers, remotes or garden lights. Outdoor lighting is specified instead with the dedicated 9W and 6W DC24V RGB+CCT garden lights and fixture work, on the same 24V control layer as the interior strips. That is worth taking seriously at the bayside end of this area - Sandgate, Shorncliffe, Brighton, Deagon and Nudgee - where the air carries salt.
Do you supply trade in this part of Brisbane?
Yes - trade pricing, bulk supply and bookable lighting consultations are offered to electricians and builders, and supply does not depend on who installs it, since a licensed electrician fits the system under their own licence. The commercial side of this area is genuinely large: by the ABS's mesh-block land-use classification it holds 24.5% of all Brisbane City's industrial-category land and 19.6% of its commercial-category land while holding 13.9% of the city's area - and close to half of that industrial land is inside the Brisbane Airport statistical area, so the share describing the rest of the sub-region is about 13%, not a quarter. Custom signage and neon lighting runs as a separate made-to-order service, brief to install.
Get a quote for your North Brisbane project
If you are pricing LED strip lighting anywhere in Brisbane's northern suburbs, start with the design consultation rather than a parts list. There is no tier to compare and no bundle price to quote, the right specification changes from one district to the next, and the job in front of most readers here is a retrofit into a house that is already finished and lived in - which is a design problem before it is a purchase. The lighting quote is free and pricing is upfront. Electricians, builders and shopfitters book the same consultation for trade pricing and bulk supply. The mains side is then connected under Electrical Contractor Licence #90549. Call 0411 212 528 or use the form below to book.
Prefer to talk? 0411 212 528
