Licensed Electrical Contractor

LED Strip Lighting Packages Sunshine Coast

One matched 24V system — designed, supplied and installed by a licensed local electrical contractor.

Across the Sunshine Coast's roughly 148,600 private dwellings, nearly three in four homes are separate houses — the kind of properties where a designed package can pair interior LED strips in kitchen joinery with DC24V garden lights outside, all on one coherent system. Luxe Lighting designs custom packages from a matched 24V component range — Signature strips, matching aluminium profiles, shared drivers and one WiFi + 2.4G control layer — then installs them under Electrical Contractor Licence #90549 from its Buderim premises. Because Queensland law only allows licensed persons to carry out electrical work, the mains side of a strip lighting project is never a DIY job. Book a lighting design consultation — the quote is free and pricing is upfront — to see what your home's package looks like.

Licensed contractor · Free quotes, upfront pricing · Most installs done in a day

These packages are built for three kinds of buyer: homeowners planning kitchen, facade or garden feature lighting; builders who need lighting delivered on schedule; and electricians who want a matched system rather than a parts hunt. The owner-occupier skew matters here — about 68% of Coast dwellings are owned outright or with a mortgage, and owners can invest in permanent, hard-wired lighting where renters cannot. Every package is custom-designed: consultation, lighting design, supply from the Luxe 24V component system, then installation by a licensed electrician. There are no preset tiers to pick from — the design is the product. A repeat builder client describes multiple projects with the team as 'on-time and on-budget', and installation runs across the Coast, with Brisbane and the Gold Coast also served.

Professional Grade Systems

Australian Owned & Operated

Trade Ready Systems

Why this service matters in Sunshine Coast

The Sunshine Coast is a region of houses, not high-rises: at the 2021 Census, 73.1% of occupied dwellings were separate houses — around 93,500 of them — against just 12.8% flats or apartments. Detached homes are where a designed lighting package earns its keep, because the light can follow the architecture: LED strips under kitchen joinery and along hallway ceilings inside, with dedicated DC24V garden lights carrying the colour outside. And with about 68% of the region's homes owner-occupied, most of the people researching this page can actually invest in fixed, hard-wired lighting rather than plug-in compromises.

That hard-wired part is the catch. In Queensland, electrical work may only be performed by a licensed person — connecting drivers, dimmers and controllers into 240V wiring is not a lawful DIY job. So a 'package' that is really a box of parts leaves you two problems: whether the parts work together, and who is legally allowed to connect them. Luxe Lighting answers both at once. The range is a single 24V DC ecosystem — Signature strips pair with matching Signature aluminium profiles, run off shared 24V drivers and sit on one WiFi + 2.4G control layer that also runs the 24V garden lights — and installation is carried out under Electrical Contractor Licence #90549 from the company's Buderim premises on the Coast.

The results customers describe are the two transformations this page is really about. One recent customer said exterior lighting 'completely changed the look of the house at night'; another said the 'lighting has completely changed the kitchen'. Between those two — facade and kitchen — sits everything a designed system covers: matched aluminium profiles for a clean architectural finish, the right driver for each zone, dimmable or non-dimmable, and dedicated garden lights for outdoor colour. Because every package is designed before it is quoted, pricing is upfront and most residential installs are completed within a single day once the design is settled. Installation runs across the Coast — Noosa, Maroochydore, Mooloolaba, Kawana Waters, Caloundra and surrounding areas — with Brisbane and the Gold Coast also served.

Common problems we solve

The six ways strip lighting projects go wrong — and how a designed package avoids each one.

  1. Strips, profiles, drivers and controllers bought separately don't work together

    Why it happens

    Online LED parts come from different ecosystems with different voltages, channel sizes and control protocols, so a strip bought one month rarely matches a profile or driver bought the next.

    Why it matters

    Mismatched components mean visible joins, strips that won't sit in their channel, undersized drivers, and scenes that can't be controlled together.

    Our response

    Every Luxe package is designed from one 24V DC ecosystem: Signature strips pair with matching Signature profiles (10x10 strip to 10x10 profile, 16x16 strip to 16x17 profile), share 24V drivers, and run on a single WiFi + 2.4G control layer.

  2. DIY wiring of LED drivers and dimmers is illegal in Queensland

    Why it happens

    Strip lighting is marketed as a DIY product, so buyers assume connecting a driver or dimmer into fixed wiring is fair game.

    Why it matters

    In Queensland, electrical work may only be performed by a licensed person — unlicensed DIY electrical work is illegal and attracts significant penalties.

    Our response

    Installation is part of the package, carried out by a licensed electrician under Electrical Contractor Licence #90549, so the mains side of the job is done lawfully.

  3. Bare stick-on strip looks like tape, not architecture

    Why it happens

    DIY kits skip the aluminium channel and diffuser, leaving adhesive tape stuck straight onto joinery or plasterboard.

    Why it matters

    Exposed tape shows dots and glue lines, and the effect reads as a gadget rather than designed lighting.

    Our response

    Luxe finishes strips in aluminium extrusions — recessed 23x9mm, surface-mount 17x9mm, and the Signature 16x17 and 10x10 profiles made for the Signature strips.

  4. Choosing the wrong driver for the zone

    Why it happens

    Driver selection involves wattage headroom, dimming capability and ingress protection — details collection pages rarely explain.

    Why it matters

    An undersized or non-dimmable driver locks in the wrong result for the room, and only some drivers carry a published rating for protected outdoor locations.

    Our response

    The design consultation specifies each zone's driver from the matched 24V range — a 100W dimmable (IP20) or 200W non-dimmable (IP67) unit — before anything is bought.

  5. Wanting outdoor colour but reaching for indoor strip

    Why it happens

    The after-dark facade transformations people see in reviews and showcase videos make strip lighting look like an anywhere product.

    Why it matters

    Not every component is an outdoor product, and outdoor use is a specification decision, not an assumption.

    Our response

    For gardens and outdoor colour scenes, the design uses the dedicated 9W and 6W DC24V Smart LED Garden Lights (RGB+CCT), which run on the same 24V system and control layer as the strips.

  6. Worry about mess, disruption and open-ended timelines

    Why it happens

    Feature lighting is often retrofitted into finished, lived-in homes, so having trades in the house is a real cost.

    Why it matters

    A multi-day install with an unclear price turns a lighting upgrade into a renovation.

    Our response

    Pricing is upfront with a free lighting quote, and most residential feature lighting installs are completed within a single day; one customer specifically noted the site was left tidy after extra lights were added in their kitchen.

What's included in a Sunshine Coast package

Every package is custom-designed — the design is the product, not a preset tier.

  • Lighting Design Consultation

    A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.

    Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.

  • 24V LED Strip Supply

    Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.

    One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.

  • Licensed Installation

    Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.

    Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.

  • Trade Supply for Builders & Electricians

    The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.

    A repeat builder client describes multiple projects delivered 'on-time and on-budget'.

  • Smart LED Garden Lights

    9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.

    Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.

Shop by Category

LED Strip Lighting
LED Strip Lighting

LED Strip Lighting

Garden Lighting
Garden Lighting

Garden Lighting

Controllers
Controllers

Controllers

LED Extrusions
LED Extrusions

LED Extrusions

LED Drivers
LED Drivers

LED Drivers

Packages
Packages

Packages

Why trust Luxe Lighting

Installation work is carried out under Electrical Contractor Licence #90549, and the business operates from real premises at 5/13 Kayleigh Dr, Buderim QLD 4556. Tim, the licensed electrician behind the business, brings well over a decade of high-end residential and commercial lighting experience. Customers describe the team as 'professional, efficient, and highly knowledgeable', a repeat builder client reports multiple projects delivered 'on-time and on-budget', and one recent exterior lighting customer said the work 'completely changed the look of the house at night'. Pricing is upfront, lighting quotes are free, and most residential feature lighting installs are completed within a single day.

Areas we cover around Sunshine Coast

Installation runs across Sunshine Coast and the surrounding areas, with the wider region also served.

Frequently asked questions

Can I install an LED strip lighting package myself in Queensland?

Not the mains side. In Queensland, electrical work may only be performed by a licensed person — DIY electrical work is illegal, with lawful DIY limited to tasks like changing a light bulb. Connecting drivers, dimmers and controllers into fixed wiring is licensed work, which is why installation under Electrical Contractor Licence #90549 is part of every Luxe package.

Why is there no package price list?

Because the packages are custom-designed, not fixed tiers. Each one is built through consultation, lighting design, supply from the matched 24V component system and licensed installation, so the quote reflects your rooms and zones. Pricing is upfront and the lighting quote is free.

How long does installation take?

Most residential feature lighting installs are completed within a single day once the design is settled. Larger or multi-zone projects may take longer.

Can the LED strips be used outside on the facade or alfresco?

Outdoor colour scenes in the Luxe range come from the dedicated 9W and 6W DC24V Smart LED Garden Lights, which share the strips' 24V system and control layer. Among the drivers, only the 200W non-dimmable unit carries a published IP67 rating. Where and how any component can be used outdoors is a specification decision made in your design consultation, not an assumption.

Do the strips and garden lights dim and run scenes together?

The control layer spans an AC Triac Dimmer, a Single Colour LED Controller and a 5-in-1 LED Controller covering single colour, CCT, RGB, RGBW and RGBCW, plus a wall-mounted Luxe Pro Panel Remote in black or white — all WiFi + 2.4G. The 5-in-1 controller also runs the 24V garden lights, so interior strips and garden colour sit on one system.

Which Sunshine Coast areas do you install in?

Installation is available across the Coast — including Noosa, Sunshine Beach, Maroochydore, Mooloolaba, Kawana Waters, Caloundra, Alexandra Headland, Mountain Creek, Sippy Downs and surrounding suburbs — with Brisbane and the Gold Coast also served. The business operates from 5/13 Kayleigh Dr, Buderim.

Do you supply to builders and electricians?

Yes — supply runs Australia-wide by e-commerce, with Sunshine Coast based installation by licensed electricians. One repeat builder client describes delivery across multiple projects as 'on-time and on-budget'.

Get a quote for your Sunshine Coast project

If you're pricing up strip lighting for a Sunshine Coast home, start with the design consultation rather than the parts list. The lighting quote is free, pricing is upfront, and most residential installs are completed within a single day once the design is settled. And because Queensland law only permits licensed persons to carry out electrical work, the package's licensed installation under licence #90549 isn't an add-on — it's the part that makes the whole system legal to switch on. Call 0411 212 528 or use the form below to book.

Prefer to talk? 0411 212 528

See our recent work

Shop the lighting