Licensed Electrical Contractor

LED Strip Lighting Packages Brisbane

Designed to the house, supplied from one matched 24V system, and connected on the mains side by a licensed electrician.

The Brisbane City Council area holds 465,124 occupied private dwellings, and 291,311 of them are separate houses (ABS, 2021 Census). That makes strip lighting here a house job - kitchens, joinery, stairs, entries and gardens - rather than an apartment fitout. Luxe Lighting designs each package around the property instead of selling a tier: a lighting consultation, a design, supply from one matched 24V system of strips, profiles, drivers and controls, then licensed installation of the mains side under Electrical Contractor Licence #90549. Lighting quotes are free and pricing is upfront. Book the consultation and see what your property's package looks like.

Call 0411 212 528 Request a free quote

Licensed contractor · Free quotes, upfront pricing · Most installs done in a day

A package here is designed, not picked off a list. The order is the same every time: a lighting consultation, a design for the rooms and outdoor areas that matter, supply from one matched 24V component system, then installation of the mains side by a licensed electrician. That order does real work in Brisbane, because the council area is not one kind of house - Brisbane City Council maps character overlays over housing built in or before 1946, alongside everything the city has built since - and the right specification is not the same in both. Luxe designs, supplies and installs LED strip lighting in Brisbane. Builders and electricians take the same consultation route, for trade pricing and bulk supply.

Why this service matters in Brisbane

Of the three east-coast capitals, only one has a council that is close to being the whole city. At the 2021 Census the Brisbane local government area held 1,242,825 people, about half of Greater Brisbane's 2,526,238 (ABS). The council named for Sydney held 211,632, roughly one in twenty-five of Greater Sydney; Melbourne's held 149,615, roughly one in thirty-three of Greater Melbourne. Some of that gap is metropolitan size; some of it is where the council boundary is drawn - Council's area covers 190 suburbs rather than a city centre. The dwelling split turns on neither: separate houses are 62.6% of occupied private dwellings in the Brisbane LGA, against 2.1% in the Sydney LGA and 2.2% in the Melbourne LGA. Brisbane City Council is a whole-city council of houses; the councils called Sydney and Melbourne are city-centre councils of apartments.

So a Brisbane strip lighting job is a house job - kitchens, joinery, stairs, entries, gardens - across 465,124 occupied dwellings, 291,311 of them separate houses, in what Council calls the largest local government in Australia by population.

Those houses are not one vintage. City Plan 2014 carries character overlays drawn around a construction date: Council states that character properties 'primarily include buildings built before the end of 1946', and that the Traditional building character overlay is 'intended to maintain the traditional, pre-1947 streetscape'; both overlays are mapped and published as open data. What the overlay says the city cares about is how the street frontage reads - which is exactly what feature lighting changes after dark, without touching protected fabric.

One specification could not serve the whole council area anyway: the ABS statistical area covering the inner city is 57.8% flats or apartments, against 25.6% council-wide. What scales is a system rather than a kit - Signature strips into matching profiles, shared 24V drivers, one control layer that also runs the 24V garden lights. The system is common; the specification is not - which is why the only numbers here are component prices: $175, $350, $325 and $140 as displayed.

On all of it, the mains side is electrical work under the Electrical Safety Act 2002 (Qld), and the Act's extra-low-voltage exclusions at section 18(2)(p) for connecting and (q) for disconnecting are not a voltage test - each carries four cumulative conditions.

Common problems we solve

The six ways strip lighting projects go wrong — and how a designed package avoids each one.

Your house is one of Brisbane's older ones and you don't want lighting that fights it

Why it happens

Brisbane City Council's City Plan 2014 carries character overlays drawn around a construction date - character properties 'primarily include buildings built before the end of 1946, with special considerations for buildings built before 1911' - and both overlays are mapped and published as open data across the city.
Why it matters

It is worth being exact about what the character overlays are. Council's published guidance puts them on demolition, the retention of houses built before 1911, extensions, new houses and alterations to the traditional streetscape; it names no lighting trigger anywhere, and nothing in it treats a lighting installation as a change the character overlay codes assess. What the age of the house does change is the install: where a profile can be concealed depends on how that particular house is built, not on what year is on the plan.
Our response

The consultation happens at the house: profile runs, concealment and driver locations are worked out against what is actually there, then specified from the matched 24V system. If you want to know whether your own property sits in an overlay, check it against City Plan.
There is no package price to compare against, which makes the whole thing hard to budget

Why it happens

There is no published tier list, inclusion sheet or bundle price, because a package here is drawn at design stage rather than boxed in advance.
Why it matters

Until the design exists there is nothing to price accurately, because what a package costs depends on how many runs your house needs, how long they are, how many 24V drivers carry them and how much control sits over them. That matters when you are setting money aside: the only figure you can act on is one drawn against your own rooms, and until it exists the honest numbers are the individual component prices rather than a total.
Our response

The numbers that are real are the four component prices published on the site - $175, $350, $325 and $140 as displayed at the time of writing. The total follows the design, which is what the free lighting quote produces.
The deck and the garden get used all year, so running the same strip outside looks obvious

Why it happens

Bureau of Meteorology figures for its Brisbane station put the mean daily maximum at 30.4 degrees C in January and 22.0 degrees C in July, with an annual mean maximum of 26.7 - outdoor areas here are in use after dark in every month, not one season.
Why it matters

The same station record shows 1,065.2 mm of rain a year concentrated in a humid summer, which is exactly the environment that finds an unrated product. An IP rating is a tested classification under IEC 60529 that a product either carries or does not, and no Luxe strip carries a published one - the only IP figures in the range belong to two drivers' enclosures, IP20 on the 100W dimmable and IP67 on the 200W non-dimmable.
Our response

Everything outdoors is specified with the 9W and 6W DC24V RGB+CCT garden lights and fixture work, which sit on the same 24V control layer as the interior strips, so the scenes still run together.
Assuming that because the strip runs at 24 volts, the whole job is a DIY job

Why it happens

Strip lighting is sold as a consumer product, and the Electrical Safety Act 2002 (Qld) does carry exclusions covering extra-low-voltage equipment.
Why it matters

Those exclusions are not a voltage test. Section 18(2)(p) covers connecting and (q) covers disconnecting, and each sets four conditions that have to be satisfied together: the task must be safely performable by someone without expertise in electrical work; the equipment must remain, or have been, at extra low voltage; it must not sit where the atmosphere presents a fire or explosion risk; and it must not be part of a cathodic protection system. The mains side - a 24V driver hardwired into a circuit, a dimmer, a new lighting circuit, any switchboard work - is electrical work regardless, and Queensland requires a contractor licence where that work is done as part of a business.
Our response

Luxe splits the job at that line and carries out the licensed side under Electrical Contractor Licence #90549 - a state register entry you can check before booking.
Strips, profiles, drivers and controllers bought separately don't work together

Why it happens

Online LED parts come out of different ecosystems with different voltages, channel dimensions and control protocols, so a strip bought one month rarely matches a profile or driver bought the next. That bites harder in this council area than in a city-centre market, because the job here is a whole house rather than a single-room fitout - kitchen, stairwell, entry and garden, specified at different times.
Why it matters

Mismatched parts show up as visible joins, strip that will not seat in its channel, undersized drivers, and scenes that cannot be run from one controller. Across rooms lit months apart that is not one bad join but a house that never reads as one scheme, because what is already installed decides what the next room can be matched to.
Our response

The Luxe range is one 24V DC system: Signature strips pair to matching Signature profiles (10x10 strip to the 10x10 profile, 16x16 to the 16x17), share 24V drivers, and sit on a single WiFi and 2.4G control layer whose 5-in-1 controller also runs the 24V RGB+CCT garden lights.
You want the system, but you already have an electrician you use

Why it happens

65,259 Technicians and Trades Workers live in the Brisbane local government area, 9.9% of its employed residents, so a large share of readers either are one or know one well.
Why it matters

Supply and installation are usually sold as one take-it-or-leave-it package, which forces a choice between the components you want and the tradesperson you trust.
Our response

They are separate paths here. Trade pricing, bulk supply and bookable lighting consultations are offered to electricians and builders, and a licensed electrician who buys the system installs it under their own licence.

What's included in a Brisbane package

Every package is custom-designed — the design is the product, not a preset tier.

Lighting Design Consultation
A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.
Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.
24V LED Strip Supply
Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.
One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.
Licensed Installation
Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.
Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.
Trade Supply for Builders & Electricians
The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.
A repeat builder client describes multiple projects delivered 'on-time and on-budget'.
Smart LED Garden Lights
9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.
Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.

Why trust Luxe Lighting

Work in the Brisbane City Council area is booked, not a call-out: the consultation happens at the property, the design and specification come out of it, and the mains-side connection is done on a set date. The installer drives to the job from Buderim, the business's only premises, so distance is a scheduling question, not a competence one. Tim, the licensed electrician behind the business, brings well over a decade of high-end residential and commercial lighting; George S described the design and installation as 'professional, efficient, and highly knowledgeable'. Electrical Contractor Licence #90549 is issued by the state, not by a council: it covers the same mains-side work here as at Buderim, and it is a register entry you can check before booking. Nor does the Act stop at a council boundary - hardwiring a 24V driver into a circuit is electrical work in every Queensland postcode. On keeping the date, Klaye, a builder across multiple projects, describes delivery as 'on-time' and 'on-budget' - a Luxe customer, not a Brisbane one, like every review here: nothing on this page is recorded as Brisbane work, and the install showcases name no locations either.

Areas we cover around Brisbane

Installation runs across Brisbane and the surrounding areas, with the wider region also served.

Frequently asked questions

Do you install LED strip lighting in Brisbane?

Yes. Luxe designs, supplies and installs LED strip lighting in Brisbane, and Brisbane is named on the trade arm's published service-area statements. The installer travels from 5/13 Kayleigh Dr, Buderim, which is the only premises the business has - there is no office, depot, showroom or crew anywhere in the Brisbane council area, and no coverage radius or response time is published. Access, scope and timing for a particular property are settled in the design consultation.

We've got an older character-era house. Can you light it without altering it?

That is the usual brief, and two things are worth separating. Brisbane City Council's City Plan 2014 character overlays concern the building fabric and the street frontage - character properties 'primarily include buildings built before the end of 1946' - and the Traditional building character overlay is 'intended to maintain the traditional, pre-1947 streetscape'. On Council's published guidance those overlays are not lighting controls: the guidance names no lighting trigger, and nothing in it treats a lighting installation as a change the character overlay codes assess. What the age of the house does change is the install itself, because where a profile can be concealed depends on how your house is actually built - so it is worked out at the consultation rather than assumed from a plan. If you want to know whether your own property sits in an overlay, check it against City Plan.

What is actually in a custom LED strip lighting package, and what does it cost?

There are no fixed tiers and no bundle price. A package is a lighting consultation, a design for the rooms and outdoor areas that matter, supply from the matched 24V component system - Signature strips, matching Signature aluminium profiles, shared 24V drivers, and a WiFi and 2.4G control layer - and then licensed installation of the mains side. Cost follows the design. The prices that are published are component prices: $175, $350, $325 and $140 as displayed at the time of writing. The lighting quote is free and pricing is upfront.

Can I install LED strip lighting myself?

Partly, and the line is worth stating precisely. Under the Electrical Safety Act 2002 (Qld), electrical work includes connecting supply wiring to electrical equipment and installing, altering, adding to or repairing an electrical installation - so hardwiring a 24V driver into a circuit, fitting a dimmer, adding a lighting circuit or any switchboard work is licensed work. The Act's extra-low-voltage exclusions, at section 18(2)(p) for connecting and (q) for disconnecting, are not a voltage test: each carries four conditions that have to be met together, and voltage is only the second. Queensland requires an electrical work licence to carry out electrical work at all - so the mains side is for a licensed electrician, not for you, unless you hold that licence - and an electrical contractor licence on top of it where the work is done as part of a business. Luxe carries out the licensed side under Electrical Contractor Licence #90549. If you are a licensed electrician, trade supply is the other path.

Can any of it go outside? We use the deck and the garden all year.

The year-round use is real: Bureau of Meteorology figures for its Brisbane station put the July mean daily maximum at 22.0 degrees C and the January figure at 30.4. Strip is not the way to do it. An IP rating is a formal classification under IEC 60529 that a product either carries as a tested result or does not, and no Luxe strip carries a published rating - the only IP figures in the range are IP20 on the 100W dimmable driver and IP67 on the 200W non-dimmable one, and a driver's rating belongs to that enclosure alone. Outdoor work is specified with the 9W and 6W DC24V RGB+CCT garden lights and fixtures, on the same 24V control layer as the interior strips. Those climate figures are one station's record, not an average across 190 suburbs.

Can I buy the system and get my own electrician to fit it?

Yes, and it is a normal path rather than a fallback. Trade pricing, bulk supply and bookable lighting consultations are offered to electricians and builders, and a licensed electrician who buys the system installs it under their own licence. It is also the path that is indifferent to where anyone is based, because supply ships Australia-wide and needs no local installation footprint. Component prices as displayed are $175, $350, $325 and $140.

Get a quote for your Brisbane project

If you are pricing LED strip lighting anywhere in the Brisbane City Council area, the useful first move is the design consultation rather than a parts list - because the right specification depends on which house you are standing in, and this council area holds stock Council maps as built in or before 1946 next to everything built since. The lighting quote is free and pricing is upfront. Design, supply and licensed connection of the mains side run under Electrical Contractor Licence #90549. Builders and electricians book the same consultation for trade pricing and bulk supply. Luxe Lighting is not connected to, contracted by or endorsed by Brisbane City Council, the ABS or any government body; City Plan and the census are public information quoted here as context. Call 0411 212 528 or use the form below to book.

Prefer to talk? 0411 212 528

sales@luxelighting.com.au