The word package normally means a box with a name on it. It does not here, and not by choice: re-checked on 3 August 2026, the collection it points at still shows 'Our Packages are Coming soon' over four individually priced components, with no tier, no bundle price, no inclusion list and no warranty term published anywhere. What stands in its place is worth more, given what this page is about. A package here is a written specification - which strip, which size-matched profile, which driver at which rating, how the zones are split. A tier name tells the next person nothing. A named parts list tells them everything, and it is still readable in five years.
Licensed Electrical Contractor
LED Strip Lighting Packages Loganlea
One matched 24V system, written down part by part, so what is in the ceiling can still be identified by name and size long after the install.
An LED strip installation is not something anybody takes with them. The driver is hardwired into a circuit and the profile is recessed into the ceiling, so both belong to the building. In Loganlea, 1,726 of 2,782 occupied private dwellings were rented at the 2021 Census, 62.0% against 30.6% nationally (ABS, Loganlea SAL31681). As a fact about buildings, that sets one design requirement: whoever opens that cupboard in five years to add a run or replace a driver has to work it out from the parts. Luxe Lighting draws the design around your rooms, supplies the parts from a single matched 24V family and installs the mains side under Queensland Electrical Contractor Licence #90549. Send through your project details to start.
Licensed contractor · Free quotes, upfront pricing · Most installs done in a day
Professional Grade Systems
Australian Owned & Operated
Trade Ready Systems
Why this service matters in Loganlea
Common problems we solve
The six ways strip lighting projects go wrong — and how a designed package avoids each one.
-
Nobody can say what is already in the ceiling.
Why it happens
Strip lighting is bought as a finished effect rather than as a parts list, so the colour temperature, the profile size and the driver's capacity get decided once and written down nowhere.
Why it matters
It only becomes a problem later - when a run has to be extended, a driver replaced, or a second stage matched to the first. Whoever does that work has only what is physically in front of them to go on, and if the parts were never written down there is nothing to work from. Guesswork at that point is how two colour temperatures end up in one room.
Our response
The design is written as a specification with its parts named in it - which Signature strip, which size-matched profile, which driver at which rating, how the zones are split - and it ends in a document rather than in a recollection of what was agreed.
-
The driver ends up somewhere nobody can reach.
Why it happens
A driver is a serviceable component, and on site it tends to go wherever the nearest cavity is at the moment the ceiling is closing.
Why it matters
Replacing one is not a matter of unplugging anything. Connecting supply wiring to electrical equipment, or disconnecting it, is electrical work under section 18(1) of the Electrical Safety Act 2002 (Qld), so the mains side of that swap is licensed work whoever carries it out. A driver sealed behind fixed plasterboard turns a component change into building work.
Our response
Driver sizing and driver position are decisions taken at the design stage rather than on the day - the 100W dimmable and 200W non-dimmable units are matched to the actual run load and sited where a licensed electrician can get back to them.
-
Knowing exactly where the licensed line falls, which matters most if you can do part of the work.
Why it happens
The Act really does carry extra-low-voltage exclusions, so at a glance it looks like a voltage rule - and 501 of the suburb's employed residents are Technicians and Trades Workers, 15.8% against 12.9% nationally (ABS, SAL31681), who are entitled to a precise answer rather than a discouraging one.
Why it matters
The voltage is not what decides it. Under section 18(1) of the Electrical Safety Act 2002 (Qld), connecting supply wiring to electrical equipment or disconnecting it, and installing, adding to, altering, repairing or maintaining electrical equipment or an electrical installation, is electrical work. Section 18(2)(p) lifts the connecting of an item of prescribed electrical equipment out of that meaning only if four conditions are all satisfied: the task can be safely performed by a person who does not have expertise in carrying out electrical work; after they are connected the item and the existing equipment remain at extra low voltage; the equipment is not located in an area in which the atmosphere presents a risk to health and safety from fire or explosion; and it is not, and is not part of, a cathodic protection system. Disconnecting is dealt with the same way at section 18(2)(q), on the same four conditions, with the voltage test in the mirrored tense - there the question is whether the item and the existing equipment were at extra low voltage before they were disconnected.
Our response
So the mains side stays licensed work either way: hardwiring the driver, running the circuit that feeds it, anything at the board. Luxe does that side through its trade arm on Queensland Electrical Contractor Licence #90549. An electrician who buys the system instead fits it on their own ticket rather than on ours.
-
Strip specified for the entry, the path or the garden bed.
Why it happens
Outside is where the change reads most strongly - one customer described an external lighting job as having 'completely changed the look of the house at night' - and indoors the strip behaves like something that could go anywhere.
Why it matters
An ingress protection rating is a tested classification under IEC 60529:1989+AMD1:1999+AMD2:2013, Edition 2.2, which applies to the classification of degrees of protection provided by enclosures for electrical equipment. It belongs to the enclosure that was tested for it and does not travel down the cable to anything else. Unrated means unclassified rather than probably fine.
Our response
Strip goes in dry interior positions and nowhere else, with no outdoor, patio, balcony or wet-area suitability claimed for any of it. Entry, path, step and garden work is carried by the purpose-built 9W and 6W DC24V RGB+CCT garden lights and by fixture work of the kind in the published install videos, running on the same control layer as the interior.
-
A control layer that only works from the phone it was set up on.
Why it happens
Strip lighting is sold with an app, and the pairing is done once, by whoever happens to be standing there on the day.
Why it matters
A scheme reachable through one handset eventually gets used as a single on-off switch, and the zoning and dimming the design was actually for stops being used at all. That is a waste of the part of the job that cost the most to think about.
Our response
Zones are drawn so the scheme works from the wall as well as from the app - the WiFi and 2.4G control layer includes the Luxe Pro Panel wall remote, and the 5-in-1 controller runs the 24V RGB+CCT garden lights on the same layer as the interior runs. Compatibility with any particular smart-home platform is not published for these controllers and is not claimed here.
What's included in a Loganlea package
Every package is custom-designed — the design is the product, not a preset tier.
-
Lighting Design Consultation
A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.
Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.
-
24V LED Strip Supply
Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.
One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.
-
Licensed Installation
Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.
Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.
-
Trade Supply for Builders & Electricians
The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.
A repeat builder client describes multiple projects delivered 'on-time and on-budget'.
-
Smart LED Garden Lights
9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.
Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.
Shop by Category
LED Strip Lighting
LED Strip Lighting
Garden Lighting
Garden Lighting
Controllers
Controllers
LED Extrusions
LED Extrusions
LED Drivers
LED Drivers
Packages
Packages
Why trust Luxe Lighting
Frequently asked questions
Most of the dwellings around here are rented. Does that change what you would specify?
It changes what the specification has to survive, not what is possible. Combined owner-occupation in Loganlea was 34.7% at the 2021 Census - 966 of 2,782 occupied private dwellings, adding those owned outright to those owned with a mortgage (ABS 2021 Census, Loganlea SAL31681) - and that is a fact about buildings rather than about the people in them. It says nothing about who will be in any particular house later, and this page does not guess. What it does settle is the hardware: the driver is hardwired into a circuit and the profile is recessed into the ceiling, so the installation stays where it was put and the specification has to hold up on its own terms rather than in somebody's memory. So the design names its parts, the driver is sized and sited where a licensed electrician can get back to it, and everything comes from one 24V family, so a later addition is drawn against what is already in the building instead of approximated. Who commissions the work is a separate question, and this page does not assume an answer to it.
A lot of things near here carry the Loganlea name. Do the figures on this page describe my address?
Only if your address is in the suburb of Loganlea itself, because the name travels further than the boundary does. TAFE Queensland's own campus page prints the address of its Loganlea campus as '50-68 Armstrong Road, Meadowbrook Qld 4131', so a Loganlea name is not evidence of a Loganlea location. Every Loganlea figure here is taken from a single geography - 'Loganlea, Suburbs and Localities', ABS code SAL31681, the one that matches the suburb a reader means - and the council-area and national comparators on this page are read from their own ABS pages rather than lifted out of Loganlea's column. A second ABS geography also called Loganlea covers a wider footprint and returns materially different numbers, so a figure quoted without its geography attached is not really a figure. Two practical consequences. If your property is actually in a neighbouring locality, say so and we will not pretend these numbers describe it - the design conversation is about your rooms rather than your postcode in any case. And no job is ever described on this site as Loganlea work on the strength of a name.
Get a quote for your Loganlea project
Take the awkward part first. The trade site's published service statement names the Sunshine Coast, Brisbane and the Gold Coast; the City of Logan is not one of the three, so the commitment to install in Loganlea is one the business is making to you directly and not one you will find written on its site. Supply does not sit in that position - 'Fast shipping Australia-wide' is published. If that is acceptable, the way in is the contact page's form, sales@luxelighting.com.au or 0411 212 528, and what follows is set out there in the company's own words: 'We review your project details', then 'We recommend the right lighting system', then 'We send through a quote / purchase order'. What is worth having ready is the geometry rather than the mood - which rooms have to read differently after dark, which entry and garden areas you want working, where there is ceiling depth for a recessed profile and where there is not, and where a driver can still be reached once the plasterboard is back up. Those answers are what the written specification gets made from, and that specification is the part of this that has to still make sense to somebody reading it cold.
Prefer to talk? 0411 212 528
