Licensed Electrical Contractor

LED Strip Lighting Packages Morayfield

One design for the whole house, one matched 24V system, fitted in the stages that suit your household - installed by a licensed Queensland electrical contractor.

Morayfield filled up fast. Between the 2016 and 2021 Censuses it added more than three thousand people and close to two thousand dwellings - more people than its larger neighbour Caboolture added over the same five years. What moved in were big, full households: three in four are family households, and only one household in five is a single person living alone. Luxe Lighting designs LED strip lighting packages for those homes - a free lighting design consultation, a design drawn for your rooms, supply from one matched 24V system, and licensed Queensland installation. There is a lot of house to light, so we specify all of it once and fit it in the stages you choose. Book the consultation to start.

Licensed contractor · Free quotes, upfront pricing · Most installs done in a day

'Package' here does not mean a box with a number on it. Luxe Lighting publishes no tiers and no bundle prices - the packages collection still lists four individually priced components and no package at all - so a package is a sequence: a free lighting design consultation, a design drawn for your rooms, supply from the 24V Signature component system, and installation by a licensed Queensland electrical contractor. What changes is the house. In Morayfield that is usually a separate one, four in five occupied homes being separate houses, and more often than not a home with four or more bedrooms and two or three vehicles outside it.

Professional Grade Systems

Australian Owned & Operated

Trade Ready Systems

Why this service matters in Morayfield

Morayfield has already had its growth spurt. Between the 2016 and 2021 Censuses the suburb went from about 21,400 residents to about 24,900 - more than three thousand extra people - while private dwellings rose from roughly 7,700 to about 9,500. Over the same five years the larger Caboolture next door added around three thousand one hundred, from a base roughly a quarter bigger. Those counts sit on slightly different suburb boundaries, so read them as direction and rough size, not certified rates. ABS estimates published since then still list an area named Morayfield among Queensland's faster-growing, though that area is a statistical one rather than the suburb itself. For lighting the point is plain: these houses are standing, occupied and being lived in now.

What filled them is where Morayfield separates from its neighbour. Three quarters of households here are family households - 75.1%, against 69.6% next door - and only 20.7% are one person living alone, where in Caboolture more than one in four is. The average household runs 2.7 people. More people under one roof means more schedules under it, and one bright ceiling circuit per room serves none of them well.

The homes are also unusually large. More than half of Morayfield's occupied dwellings - 51.1% - have four or more bedrooms, against 46.6% across the City of Moreton Bay, 41.1% across Greater Brisbane and 34.8% nationally, and the average dwelling carries 3.5 bedrooms. Nearly a quarter of dwellings keep three or more registered vehicles and only 4.0% keep none. Put those together and the brief is specific: a long approach, a driveway and garage in use at odd hours, and a lot of interior to cover in rooms that are rarely all empty at once.

One matched 24V system is the practical answer to that. Signature neon strips pair with matching Signature aluminium profiles, share the same 24V drivers, and run on one WiFi and 2.4GHz control layer that also drives the 24V RGB+CCT garden lights. Specify the whole house at the consultation, fit the rooms in whatever order suits, and each later stage still matches: the same 24V bus, the same Signature profile family, one driver-sizing decision. It also suits the way the suburb is changing: the share of Morayfield homes that are townhouses or otherwise attached has risen noticeably since the 2016 Census, and surface-mounted profile puts a designed run into a shared-wall home without cutting into structure that is not yours alone.

Common problems we solve

The six ways strip lighting projects go wrong — and how a designed package avoids each one.

  1. The last car home at eleven pulls into a dark driveway, and getting inside wakes the house.

    Why it happens

    Morayfield runs more vehicles than its neighbour - 23.4% of dwellings keep three or more registered, against 21.1% in Caboolture and 18.8% nationally, and only 4.0% keep none - in households averaging 2.7 people, three quarters of them family households. Several people, several sets of hours, one driveway.

    Why it matters

    The approach, the garage and the entry get used at times nobody else is using them, and the usual answer is one harsh floodlight plus whatever hall light sits nearest the door - which lights the half of the house that is asleep.

    Our response

    The exterior half of a design is built with fixtures and the 9W and 6W DC24V RGB+CCT garden lights, which sit on the same control layer as the interior system, so the approach can run low and on its own; strip is not specified for outdoor runs.

  2. One hallway switch is asked to serve four bedrooms.

    Why it happens

    More than half of Morayfield's occupied dwellings have four or more bedrooms and the average carries 3.5 against 3.1 nationally, while the standard build gives the corridor connecting them a single bright ceiling circuit.

    Why it matters

    In a household of 2.7 people where only one home in five is a lone-person household, somebody is nearly always moving through the house while somebody else is asleep or working.

    Our response

    Circulation lighting is specified as low-level dimmable 24V strip in matched Signature profile, zoned and separately controlled through the WiFi and 2.4GHz layer, so one person can cross the house at night without lighting it for everyone.

  3. There is more house here than one budget will light in a single go.

    Why it happens

    Morayfield dwellings sit above their own council area, Greater Brisbane and the national figure on bedroom count - 51.1% with four or more bedrooms against 46.6%, 41.1% and 34.8% - so the whole-of-home number is larger than most households want to commit at once.

    Why it matters

    Buying it in pieces only works if every piece was specified against the same system; strip, profile, driver and controller bought a year apart otherwise do not fit what is already installed.

    Our response

    The design covers the whole house at the consultation even when only one room is being installed, so a stage bought later is drawn from the system already specified rather than matched to it afterwards, and components are priced individually so a room can be costed before it is committed.

  4. The house came with the lighting the builder put in, and nobody has touched it since.

    Why it happens

    Morayfield added close to two thousand private dwellings between the 2016 and 2021 Censuses, and lighting is often among the first items trimmed back when a house is being finished to a price, so plenty of homes are still on what they were handed over with.

    Why it matters

    Kitchens, living areas and hallways carry the evening in a full household, and that is where the result gets judged: one customer said the 'lighting has completely changed the way the kitchen looks' after extra lights and power points went in.

    Our response

    Interior work starts in the rooms the household actually shares - under-bench, shelf, cabinet and cove runs in matched Signature aluminium profile, dimmable on a 100W IP20 24V driver - and the rest of the house is drawn on the same plan for later.

  5. Strip lighting bought for the patio, the driveway or the garden beds.

    Why it happens

    Buyers see IP67 on the 200W 24V driver and assume the strip carries it too. It does not: the only IP figures published anywhere across the range belong to the two drivers - IP67 on the 200W non-dimmable and IP20 on the 100W dimmable.

    Why it matters

    An IP rating is a tested classification under IEC 60529, so a product either carries one or it does not; an unrated strip in an exposed position is an assumption rather than a specification.

    Our response

    Outdoor scope is specified instead with the 9W and 6W DC24V RGB+CCT garden lights, which run on the same 5-in-1 controller as the indoor system, and strip stays indoors or in protected positions.

  6. It is only 24 volts, so either the whole job is DIY or none of it is.

    Why it happens

    Both readings are wrong. Under the Electrical Safety Act 2002 (Qld) s18(1), installing, altering or connecting supply wiring to electrical equipment is electrical work, while s18(2)(p) and (q) exclude some connecting and disconnecting of prescribed equipment that stays at extra low voltage.

    Why it matters

    That distinction matters more here than in most suburbs: technicians and trades workers are the largest single occupational group in Morayfield, so an overstated 'you cannot touch any of it' is a line a good part of the readership can see straight through. The accurate line is that the mains side - wiring a 24V driver into a circuit, altering fixed wiring, anything at the switchboard - requires a licensed electrician, and Queensland requires a contractor licence where that work is done as part of a business.

    Our response

    Installation runs through the trade arm, Luxe Electrical Industries, holder of Queensland Electrical Contractor Licence #90549; a local licensed electrician who buys the system installs it under their own licence instead.

What's included in a Morayfield package

Every package is custom-designed — the design is the product, not a preset tier.

  • Lighting Design Consultation

    A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.

    Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.

  • 24V LED Strip Supply

    Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.

    One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.

  • Licensed Installation

    Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.

    Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.

  • Trade Supply for Builders & Electricians

    The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.

    A repeat builder client describes multiple projects delivered 'on-time and on-budget'.

  • Smart LED Garden Lights

    9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.

    Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.

Shop by Category

LED Strip Lighting
LED Strip Lighting

LED Strip Lighting

Garden Lighting
Garden Lighting

Garden Lighting

Controllers
Controllers

Controllers

LED Extrusions
LED Extrusions

LED Extrusions

LED Drivers
LED Drivers

LED Drivers

Packages
Packages

Packages

Why trust Luxe Lighting

A full house asks a tradesperson different questions depending on who is asking. The person paying wants a credential that owes nothing to reputation: Queensland requires an electrical contractor licence wherever electrical work is done as a business, and the trade arm holds #90549, a state register entry checkable before anything is booked. The person who has to live through the work wants the house back afterwards - one customer had extra lights and power points added with nobody home and no trace left behind, and said the 'lighting has completely changed the way the kitchen looks'. Whoever opens the door wants to know who is arriving: Tim, whose experience the trade site and directories both put at well over a decade, working the way one customer described as 'professional, efficient, and highly knowledgeable'. Whoever coordinates everyone else's hours wants one date that holds - the business's own account is that most residential feature lighting installs finish inside a single day, and a builder client across multiple projects calls delivery 'on-time and on-budget'. None of it is Morayfield work, and there is no office or crew here.

Areas we cover around Morayfield

Installation runs across Morayfield and the surrounding areas, with the wider region also served.

Frequently asked questions

Who has to be home while the work happens, and for how long?

That gets settled at the consultation, which costs nothing and is where the rooms are measured and the figure is fixed before any work is booked. It is a bigger question in Morayfield than in most suburbs because the households here are fuller: 2.7 people to the average home, three quarters of them family households, and only about one household in five a single person living alone. Nearly a quarter of dwellings keep three or more registered vehicles and only 4.0% keep none, which is another way of saying a single address can hold several sets of hours. The number that matters is that most residential feature lighting installs finish inside a single day, on the business's own account of its own work - one date to clear between everybody, rather than a run of them.

What does this cost for a house this size, and can we price one room at a time?

One room at a time is the only honest way to quote it, because no tier and no bundle figure exists to quote from - the collection that will eventually hold the packages still shows four separately priced components and nothing assembled. What is actually bought is a parts list from the 24V Signature range, drawn against your own rooms. The published component prices, as displayed at the time of writing, are $175.00 for the 10x10 Warm White (3000K) Free Cut Signature Side strip, $350.00 for the Signature Top version, $325.00 for the 16x16 RGBW+3000K Signature Side, and $140.00 for the 24V 100W IP20 dimmable driver. That is enough for a household to cost the kitchen on its own before anybody has to agree about the hallway. Nothing is charged for the consultation, and the figure is put in front of you before anything is committed.

Can it be fitted a room at a time, around rooms the household is still using?

Yes, and with this much house most jobs here are ordered that way. More than half of Morayfield's occupied dwellings carry four or more bedrooms and the average one carries 3.5, so committing the whole place at once is a large single decision. Specifying once is what makes the alternative work: the full house is drawn at the consultation even where only the kitchen is going in this year, so whatever is fitted later is taken from a plan that already exists rather than reverse-engineered to match what is on the wall - same 24V bus, same Signature profile family, one driver-sizing decision. Rooms in daily use are no obstacle to that. They get drawn now and fitted whenever the household is ready to give them up for a day.

Somebody in this house is on the tools. How much of a 24V install can they legally do themselves?

Part of it, and the boundary is worth stating precisely instead of pretending it falls entirely one way. Under the Electrical Safety Act 2002 (Qld) s18(1), connecting supply wiring to electrical equipment, and installing, altering or removing that equipment, is electrical work; s18(2)(p) and (q) then set out exclusions covering certain connections and disconnections of prescribed equipment that remains at extra low voltage. A blanket 'none of this is yours to touch' would therefore be untrue. What is not yours is the mains side: a 24V driver hardwired into a circuit, any alteration to fixed wiring, anything at the switchboard - all of it needs a licensed electrician, and a business performing it needs an electrical contractor licence on top. Being accurate about that matters in a suburb where technicians and trades workers are the largest single occupational group. Luxe's own installations run through its trade arm on contractor licence #90549.

The driveway and the entry get used at the oddest hours in this house. Can strip go out there?

No, and the reason is documentary rather than a matter of taste. Two items in the entire range carry a published IP figure - the 200W non-dimmable driver at IP67 and the 100W dimmable at IP20 - and each of those describes that driver's own enclosure, nothing else: not the strip, not the profile, not the controller, not the remote, not a garden light. IP is a tested classification under IEC 60529, so a product either holds a rating or it does not, and putting an unrated strip somewhere exposed is a guess presented as a specification. The exterior half of a design is built instead from the 9W and 6W DC24V RGB+CCT garden lights and fixture work, running off the same 5-in-1 controller as everything indoors - so the approach the last car home uses can sit low and on its own zone while the rest of the house stays dark.

Do you install in Morayfield, and who is it that arrives at the door?

Yes. Design, supply and installation all run to Morayfield, with the licensed electrician driving up from the only premises the business has - 5/13 Kayleigh Dr at Buderim. Somebody in the house has to open the door to whoever turns up, so it is worth being blunt about what that does not mean: no office here, no depot, no showroom, no crew based in the suburb, and not one job described anywhere on this page is a Morayfield job. Installation is carried out through the trade arm, Luxe Electrical Industries, holder of Queensland Electrical Contractor Licence #90549 - a state register entry anybody in the household can check before a date is booked. The electrician behind it is Tim, whose experience the trade site and the directories both put at well over a decade.

We share a wall with the neighbours. Does a townhouse rule it out?

Usually not, and it is asked more often here every year: the proportion of Morayfield homes that are townhouses or otherwise attached has risen noticeably since the 2016 Census. Surface-mounted Signature profile lets a designed run be fixed to the face of a wall or ceiling rather than chased into structure held in common with somebody else, and the system still sits on one 24V bus with a single driver-sizing decision. The mains side is unchanged by any of that - driver wiring and any alteration to fixed wiring remain work for a licensed electrician. Approval from a body corporate or a co-owner for anything touching shared structure is a matter for your own scheme, and not something we can assess on your behalf.

We build and renovate family homes around Morayfield. Is there a trade path?

Yes, and a real one rather than a closing footnote. Electricians and builders get trade pricing, buy in bulk, and can book the same lighting consultation a householder books. The installation footprint does not limit it either: product ships anywhere in the country regardless of where the installing arm travels. The licence question also answers itself on that route, since a licensed electrician who buys the system wires it in under their own licence. The audience here is genuinely local - technicians and trades workers are the largest single occupational group in Morayfield, in a suburb that put up close to two thousand extra private dwellings between the 2016 and 2021 Censuses. A builder using the business repeatedly across separate projects sums delivery up as 'on-time and on-budget'.

Get a quote for your Morayfield project

Start with the free lighting design consultation. It is a working visit rather than a sales call - every room walked and measured, zones and runs settled, driver capacity worked out across the whole house, and a figure put in front of you before anybody commits to anything. In a home several people share - 2.7 to the average Morayfield household, with three or more vehicles at nearly a quarter of addresses - agreeing on one date is harder than agreeing on the lighting, which is why a single planned visit beats a string of loose ones; on the business's own account, most residential feature lighting installs finish inside a single day. Draw the whole house at that consultation, fit whichever rooms you want fitted now, and leave the rest on the same 24V bus for whenever the household is ready. Electricians and builders use the same booking for bulk supply at trade pricing. The contact page is where it starts.

Prefer to talk? 0411 212 528

See our recent work

Shop the lighting