Licensed Electrical Contractor

LED Strip Lighting Packages Redcliffe

Designed at a consultation that starts with whose surface it is, supplied from one matched 24V component system, installed by a licensed electrical contractor.

In Redcliffe the first lighting question is usually not which strip — it is whose surface it is. Nearly four in ten occupied dwellings in the suburb are flats or apartments, so plenty of enquiries begin with a ceiling, a stairwell or a run of joinery that may sit inside the owner's lot or may be common property. Luxe Lighting builds its packages in that order: a consultation, a design, supply from one matched 24V system, then installation by a licensed electrical contractor. Luxe installs in Redcliffe and travels from Buderim to do it. Book a lighting consultation and the ownership question is settled before a single component is ordered.

Licensed contractor · Free quotes, upfront pricing · Most installs done in a day

A Luxe package is not a tier off a shelf — there are none — but a set of matched components chosen for one room after a consultation. In Redcliffe that consultation does an extra job: it establishes whether the surface is inside your own lot or is common property, before a component is ordered or an electrician is booked. The system behind it is coherent. Signature neon strips run at 24V and pair with their own aluminium profiles, 10x10 strip to 10x10 profile and 16x16 to 16x17; drivers are shared across the range; control is WiFi plus 2.4G, with a Luxe Pro Panel wall remote for anyone who would rather not reach for a phone. Pricing is published per component rather than per package — the 10x10 warm white 3000K Signature Side strip at $175.00, the Signature Top at $350.00, the 16x16 RGBW+3000K at $325.00 and the dimmable 24V driver at $140.00, each as displayed at the time of writing. Because hardwiring the mains side to a driver is licensed electrical work, the design and the install sit with one licensed contractor rather than being split between an online cart and whichever electrician is free.

Professional Grade Systems

Australian Owned & Operated

Trade Ready Systems

Why this service matters in Redcliffe

Before anyone chooses a strip or a profile in Redcliffe, one question is worth settling first: is the surface you want lit inside your own lot, or common property that other people have to agree to? Queensland Government guidance is plain about the difference. An improvement to common property can be approved by the body corporate committee only where the total cost is under $3,000 and further conditions are met; otherwise it must be authorised by ordinary resolution at a general meeting. A change within an owner's own lot needs no upfront approval, though the owner should consider any effect on common property and check the by-laws.

That question is live for far more buyers here than anywhere else in the council area. In the Redcliffe suburb — ABS 2021 Census, SAL32406 — 37.6% of occupied private dwellings are flats or apartments, against 14.2% nationally, 14.7% across Greater Brisbane and 4.7% across the City of Moreton Bay, roughly eight times the council-area share; separate houses are just 51.4% of the suburb's stock against 72.3%. Across the wider Redcliffe peninsula (ABS SA3 31305) flats and apartments fall to 19.3%, so the finding belongs to the suburb, not to the peninsula around it.

Tenure and household shape point the same way. In the suburb 42.3% of occupied dwellings are rented against 30.6% nationally, only 21.7% carry a mortgage, and 40.3% of households are a single person against 25.6%. The person standing in the room is often not the only person whose agreement counts, and that is far cheaper to establish before components are ordered than after.

It shapes the design brief as much as the paperwork. In a unit the surfaces on offer are joinery, soffits, internal stairs and ceilings with another dwelling above rather than a roof space. Luxe's Signature strips pair with matched aluminium profiles — 10x10 strip to 10x10 profile, 16x16 to 16x17 — in small recessed and surface-mount sections, so a run finishes inside the joinery rather than sitting on it. Where the answer is not obvious, the consultation records it as a question for your own body corporate.

One piece of local knowledge belongs to Redcliffe and nowhere else: the State Library of Queensland records that in September 1824 a group of convicts and soldiers led by Captain Henry Miller, the first commandant, established the first European settlement in what later became the colony of Queensland, at what we now call Redcliffe.

Common problems we solve

The six ways strip lighting projects go wrong — and how a designed package avoids each one.

  1. Not knowing whether the surface you want lit is yours to change

    Why it happens

    In a body corporate scheme the boundary between an owner's lot and common property is set by the scheme's plan and by-laws, not by which side of a wall you happen to be standing on — and 37.6% of occupied dwellings in the Redcliffe suburb are flats or apartments.

    Why it matters

    The approval path differs on each side of that line. Queensland Government guidance lets a body corporate committee approve an owner's improvement to common property only where the total cost is under $3,000 and further conditions are met; otherwise it must be authorised by ordinary resolution at a general meeting, while a change inside the owner's own lot has no upfront approval requirement.

    Our response

    The consultation asks the question first and works to the answer you get from your own body corporate. Nothing is ordered and no electrician is booked until it is settled, and Luxe neither decides which surfaces are common property nor obtains or advises on approvals.

  2. A 'Redcliffe' figure that actually describes somewhere else

    Why it happens

    Three ABS geographies are named Redcliffe: the suburb (SAL32406), a near-identical statistical area, and the wider peninsula (SA3 31305), which counts about six times as many residents.

    Why it matters

    A supplier working from peninsula numbers is designing for a market that is 68.1% separate houses with a median age of 48, when the suburb is 51.4% separate houses with a median age of 52. Different rooms, different surfaces, different approval questions.

    Our response

    Every local figure quoted here comes from the Redcliffe suburb (SAL32406), and anything peninsula-wide says so on its face.

  3. Fitting a trade visit around a household of one

    Why it happens

    40.3% of Redcliffe households are a single person against 25.6% nationally, and 42.3% of dwellings are rented, so the job is usually scoped, scheduled and let in by one person working around one working day.

    Why it matters

    If nobody can be home, a lighting install stops being a design decision and becomes a logistics problem — and in a small occupied dwelling, mess and disruption are felt immediately.

    Our response

    Access and timing are agreed at the consultation rather than on the day. The client's own reviews describe how that goes: Monish S wrote that 'Tim and Indy completed the work while no one was home, and when I did get home, you wouldn't even know tradies had been through the house'.

  4. Being told either that all LED strip work needs an electrician, or that none of it does

    Why it happens

    Both overstatements circulate. Under the Electrical Safety Act 2002 (Qld), connecting supply wiring to equipment and installing or altering an electrical installation is electrical work, while s 18(2)(p) and (q) exclude connecting and disconnecting prescribed equipment operating at extra low voltage where the task can be safely performed by a person without electrical expertise.

    Why it matters

    The real boundary is the 240V mains side feeding the driver, and in a unit that is the part sitting closest to services shared with other lots.

    Our response

    Business Queensland requires an appropriate electrical work licence for certain types of work, and an electrical contractor licence where that work is carried out as part of a business. Luxe's installs run through the trade arm holding Electrical Contractor Licence #90549, displayed on its own trade site.

  5. Assuming a driver's IP rating covers everything downstream of it

    Why it happens

    IP figures get quoted at system level, when IEC 60529 classifies the degrees of protection provided by enclosures for electrical equipment — the rating attaches to one specific enclosure.

    Why it matters

    On a suburb fronting Moreton Bay, with balconies and exposed elevations everywhere, reading a rating across a whole run is how the wrong component ends up in the wrong position.

    Our response

    Luxe publishes no IP rating for its strips, profiles, controllers, remotes or garden lights, so this page makes no outdoor or wet-area suitability claim for any of them. Exposed positions are settled at the consultation, and outdoor work is done with the 24V RGB+CCT garden lights rather than an indoor strip.

  6. A box of parts that never quite becomes a finished detail

    Why it happens

    Marketplace kits mix strips, drivers and controllers that were never designed to run together, and rarely arrive with a profile sized to the strip.

    Why it matters

    In a small dwelling the run sits at eye level inside the joinery, so a strip that does not seat in its channel, or a controller that will not join a scene, is visible from the sofa.

    Our response

    Luxe supplies one 24V system: strips sized to their matching Signature profiles, drivers shared across the range, and a single WiFi plus 2.4G control layer with a Pro Panel wall remote — with profile sections small enough for compact joinery.

What's included in a Redcliffe package

Every package is custom-designed — the design is the product, not a preset tier.

  • Lighting Design Consultation

    A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.

    Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.

  • 24V LED Strip Supply

    Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.

    One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.

  • Licensed Installation

    Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.

    Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.

  • Trade Supply for Builders & Electricians

    The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.

    A repeat builder client describes multiple projects delivered 'on-time and on-budget'.

  • Smart LED Garden Lights

    9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.

    Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.

Shop by Category

LED Strip Lighting
LED Strip Lighting

LED Strip Lighting

Garden Lighting
Garden Lighting

Garden Lighting

Controllers
Controllers

Controllers

LED Extrusions
LED Extrusions

LED Extrusions

LED Drivers
LED Drivers

LED Drivers

Packages
Packages

Packages

Why trust Luxe Lighting

Three different kinds of permission stand between an idea and a light being on in a Redcliffe unit, and they are worth taking in order.

First, governance. Queensland Government guidance lets the body corporate committee approve an improvement to common property only where the total cost is under $3,000 and further conditions are met; otherwise it goes to an ordinary resolution at a general meeting. Inside your own lot there is no upfront approval requirement, though the by-laws still apply. Luxe raises the question; your body corporate answers it.

Second, regulation. The 240V connection feeding a driver is licensed electrical work, and a business carrying it out needs an electrical contractor licence. Luxe's is #90549, shown on its own trade site.

Third, evidence. Monish S: 'Tim and Indy completed the work while no one was home, and when I did get home, you wouldn't even know tradies had been through the house.' John K: 'Tim gave me a quite reasonable Quote within 30 minutes of me ringing him and completed the job the next day'. Neither is a Redcliffe job — Luxe publishes no location-tagged work — but both describe how the visit itself goes.

Areas we cover around Redcliffe

Installation runs across Redcliffe and the surrounding areas, with the wider region also served.

Frequently asked questions

I live in a Redcliffe unit — will I need approval before strip lighting goes in?

It depends on whether the work touches common property or stays inside your own lot, and that is set by your scheme's plan and by-laws rather than by the type of light. Queensland Government guidance says a body corporate committee can approve an owner's improvement to common property only where the total cost is under $3,000 and further conditions are met, and that otherwise it must be authorised by ordinary resolution at a general meeting; a change within your own lot has no upfront approval requirement, though you should still consider any effect on common property and check the by-laws. Luxe cannot tell you which side of that line a particular ceiling or wall sits on, and does not obtain or advise on approvals — the consultation raises the question, you take it to your body corporate, and the design follows the answer.

I rent in Redcliffe — can I still have this done?

Renting is common here: 42.3% of occupied dwellings in the suburb are rented, against 30.6% nationally. The permission question simply arrives from a different direction — the owner's agreement rather than a committee's — and if the building is a body corporate scheme, the lot-versus-common-property question still applies to the work itself. Bring whatever your agreement says to the consultation, and the design and quote can be prepared so you have something specific to put in front of the owner or agent.

Do you install LED strip lighting in Redcliffe?

Yes. Luxe installs in Redcliffe and travels from Buderim, where its premises are, to do it. Installation is carried out through the licensed electrical arm behind the brand, holder of Electrical Contractor Licence #90549. If you would rather arrange your own electrician for the mains connection, supply-only orders ship Australia-wide.

What is in a custom package, and what does it cost?

There are no named tiers or bundle prices. A package is a consultation, a design, supply from the matched 24V system, and installation by a licensed electrical contractor. Costs are built from real components: the 10x10 warm white 3000K Signature Side strip at $175.00, the Signature Top at $350.00, the 16x16 RGBW+3000K at $325.00 and the dimmable 24V driver at $140.00, each as displayed at the time of writing. What your own quote comes to depends on run lengths, profile sections, drivers and control, which is what the consultation is for.

Do I need a licensed electrician for LED strip lighting?

For the mains side, yes. Under the Electrical Safety Act 2002 (Qld), installing or altering an electrical installation and connecting supply wiring to equipment is electrical work, while s 18(2)(p) and (q) exclude connecting and disconnecting prescribed equipment that operates at extra low voltage where the task can be safely performed by a person without electrical expertise. So the 240V connection feeding the driver is licensed work — Business Queensland requires an appropriate electrical work licence for certain types of work, and an electrical contractor licence where the work is part of a business — while the 24V run downstream of the driver is extra low voltage. In a unit that boundary carries extra weight, because the mains side is the part closest to services shared with other lots.

Can LED strips go outside, on a balcony or near the water?

Treat placement as a specification question and settle it at the consultation. IEC 60529 defines IP ratings as degrees of protection provided by enclosures for electrical equipment, so a rating belongs to one enclosure and cannot be read across a strip, profile, controller or remote. Luxe publishes no IP rating for those parts, so this page makes no outdoor or wet-area suitability claim for any strip, profile, controller or remote. Outdoor lighting is handled with the 24V RGB+CCT garden lights, which run on the same control layer as the indoor system.

Do you offer trade pricing for builders and electricians working in Redcliffe?

Yes — trade pricing, bulk supply and bookable lighting consultations are part of how the system is sold. On Redcliffe's mixed unit-and-house renovation stock that is worth pairing with the approval question, since work touching common property can run to a general meeting rather than a committee decision. Klaye, a builder who has engaged the team across several projects, describes a commitment to always deliver 'on-time' and 'on-budget'.

Get a quote for your Redcliffe project

In an apartment-heavy suburb the useful work happens first: whose surface it is, what your by-laws say you need to ask, and only then which strip, profile, driver and control suit the room. Book a lighting consultation and you get a design built for your rooms, a component list drawn from the real catalogue at published component prices, and an install through a licensed electrical contractor, licence #90549. If yours is a rental, or a building where the work has to be approved before it starts, say so when you book — the design and quote can be prepared for someone else to sign off on. Builders and electricians working Redcliffe's unit-and-house stock can book the same consultation for trade pricing and bulk supply. Call 0411 212 528 or send your room details through the form below.

Prefer to talk? 0411 212 528

See our recent work

Shop the lighting