There is no tier list behind the word 'package' here, and it would be easy to pretend otherwise. The collection that will eventually hold them still reads 'Our Packages are Coming soon', and what it lists today is four separately priced components. So a package on this page means a specification rather than a product: rooms walked and measured at a free consultation, a design drawn against them, parts taken from one 24V component family - Signature neon strips paired to matching Signature aluminium profiles, shared 24V drivers, one WiFi and 2.4GHz control layer - and the mains side wired by a licensed Queensland electrical contractor. Everything below is written for a house whose owner lives in it.
Licensed Electrical Contractor
LED Strip Lighting Packages Burpengary
One design for the whole house on a matched 24V system you can still add to years from now - wired by a licensed Queensland electrical contractor.
In Burpengary, the person deciding what the lighting should be is usually the person who owns the house. If you own it and expect to be in it a while, that narrows the sensible answer. Work in a house you are keeping is worth building in rather than sticking on, and worth specifying so the rest can be added later without a compromise. Luxe Lighting designs LED strip lighting packages for exactly that job: a free lighting design consultation, a design drawn against your own rooms, supply from one matched 24V component system, and the mains side wired by a licensed Queensland electrical contractor. Component prices are visible while you decide; no bundle figure exists, because none is published. Book the consultation to start.
Licensed contractor · Free quotes, upfront pricing · Most installs done in a day
Professional Grade Systems
Australian Owned & Operated
Trade Ready Systems
Why this service matters in Burpengary
Common problems we solve
The six ways strip lighting projects go wrong — and how a designed package avoids each one.
-
A house nobody is leaving gets the lighting a short stay would justify.
Why it happens
The reversible version is the one you can buy and fit on a Saturday. The built-in version needs a booking, because under the Electrical Safety Act 2002 (Qld) s 18(1) installing, altering, replacing or maintaining electrical equipment, and connecting supply wiring to it, is electrical work.
Why it matters
In Burpengary that trade-off is being made by owner-occupiers in two thirds of occupied homes, in a housing stock that is 83.5% separate houses. The temporary fitting is being chosen by people with nothing to reverse it for, and it is the one decision here that is genuinely a false economy.
Our response
Runs are designed into matched Signature aluminium profile with the driver sized against the whole plan rather than the first room, and the mains side is wired through the trade arm on Queensland Electrical Contractor Licence #90549.
-
The kitchen gets done, and three years later nothing else in the house can be made to match it.
Why it happens
Parts bought years apart only fit together if they were specified against the same system to begin with. The Luxe range is one 24V family - strips paired to their own profile sizes, shared drivers, and a single control layer including a 5-in-1 controller that also runs the garden lights.
Why it matters
Doing the shared rooms first and the rest as it comes up is the ordinary way a job runs in a house being kept, and with an average of 3.5 bedrooms per dwelling there is a good deal of house left over. That order only works if the later stages were drawn before the first one went in.
Our response
The consultation covers the whole house even when one room is being installed, so later work is taken from a specification that already exists rather than reverse-engineered to match what is already on the wall.
-
Outdoor lighting gets ordered as strip because a driver in the range says IP67.
Why it happens
IP67 describes one item's own enclosure - the 200W non-dimmable 24V driver. The 100W dimmable driver is IP20, and no strip, profile, controller, remote or garden light in the range carries a published IP figure at all.
Why it matters
An IP rating is a tested classification under IEC 60529, so a product either holds one or it does not; no published rating means not classified, which is not the same as probably fine.
Our response
Outdoor scope on a Burpengary block - entry, steps, garden beds, the face of the house - is specified with the 9W and 6W DC24V RGB+CCT garden lights and fixture work of the kind in the install showcases, running on the same control layer as everything indoors; strip stays inside or in protected positions.
-
The room the household actually shares is still lit by one ceiling fitting.
Why it happens
Kitchens and living areas are usually finished with a single bright circuit, which lights the room evenly and flatters nothing in it. One customer, after extra lights and power points went in, said 'The lighting has completely changed the way the kitchen looks'.
Why it matters
Those are the rooms where a lighting decision is either noticed every evening or wasted, and in a house being kept rather than sold there is no resale argument to hide behind: it works for the people in it or it does not.
Our response
Interior work starts under benches, along shelves and inside cabinetry and coves in matched Signature profile, dimmable on the 100W IP20 24V driver, with the rest of the house drawn on the same plan for whenever it is wanted.
-
Nobody is sure how much of a 24V install is theirs to do.
Why it happens
A large share of the people reading this work with their hands - Technicians and Trades Workers are Burpengary's largest single occupational group, 16.9% of employed residents against 12.9% nationally - and both blanket answers are wrong, because the law is genuinely two-sided.
Why it matters
Section 18(1) of the Electrical Safety Act 2002 (Qld) makes installing, altering, replacing or maintaining electrical equipment, and connecting or disconnecting supply wiring, electrical work. Section 18(2) then carves out exclusions: paragraph (p) covers connecting an item of prescribed electrical equipment to existing equipment and paragraph (q) covers disconnecting it, and each applies only if all four of its conditions hold - the task can be safely performed by someone without electrical expertise, the equipment remains (or was) at extra low voltage, it is not in an atmosphere presenting a fire or explosion risk, and it is not part of a cathodic protection system. It is not a voltage test on its own.
Our response
The mains side - a 24V driver hardwired into a circuit, any change to fixed wiring, anything at the switchboard - is done by a licensed electrician, and Queensland requires an electrical contractor licence where that work is carried out as part of a business. Luxe installs through its trade arm on Electrical Contractor Licence #90549; an electrician who buys the system instead installs it under their own.
What's included in a Burpengary package
Every package is custom-designed — the design is the product, not a preset tier.
-
Lighting Design Consultation
A consultation that turns your rooms, facade and garden into a zoned lighting plan with a clear, upfront quote.
Every lighting quote is free with upfront pricing — customers describe the design and installation as 'professional, efficient, and highly knowledgeable'.
-
24V LED Strip Supply
Signature LED strips in side-lit and top-lit formats, cut to the design and matched to their aluminium profiles.
One matched 24V ecosystem — strips, profiles, drivers and controls specified together, never a parts hunt.
-
Licensed Installation
Hard-wired installation of strips, drivers, dimmers and controllers by a licensed electrician.
Queensland law restricts electrical work to licensed persons — installation is part of the package, not an add-on.
-
Trade Supply for Builders & Electricians
The same matched 24V system, supplied to trade for new builds, renovations and fit-outs.
A repeat builder client describes multiple projects delivered 'on-time and on-budget'.
-
Smart LED Garden Lights
9W and 6W DC24V RGB+CCT garden lights for outdoor colour scenes.
Runs on the same 24V system and control layer as the interior strips — one designed system inside and out.
Shop by Category
LED Strip Lighting
LED Strip Lighting
Garden Lighting
Garden Lighting
Controllers
Controllers
LED Extrusions
LED Extrusions
LED Drivers
LED Drivers
Packages
Packages
Why trust Luxe Lighting
Areas we cover around Burpengary
Installation runs across Burpengary and the surrounding areas, with the wider region also served.
Frequently asked questions
We are not going anywhere. Will this still be extendable in five years?
That is the question worth asking first, and it is the reason the design is drawn for the whole house even when one room is being installed. The range is a single 24V component family: Signature neon strips pair with matching Signature aluminium profiles, the same 24V drivers serve the system, and one WiFi and 2.4GHz control layer covers it, including a 5-in-1 controller that also runs the 24V RGB+CCT garden lights. So a run added later is taken from a specification that already exists - same bus, same profile family, one driver-sizing decision made against the full plan rather than the first room. Nothing here can promise a catalogue will never change, and no warranty term is published anywhere on the site to lean on. What can be said is that the components are designed to work together as one system rather than assembled from whatever matched on the day.
We are paying for this once and keeping it. What are we actually buying, and what do the parts cost?
There is no tier and no bundle price to quote from, and it would be dishonest to invent one - the collection that will hold the packages still shows 'Our Packages are Coming soon' and lists four separately priced components. What you are actually buying is a parts list from the 24V Signature range drawn against your own rooms, plus the labour to install it. The four prices displayed at the time of writing are $175.00 and $350.00 for the 10x10 Warm White (3000K) Free Cut Signature strip in its side-lit and top-lit versions, $325.00 for the 16x16 RGBW+3000K Signature Side, and $140.00 for the 100W IP20 dimmable 24V driver. That is enough to cost one room before committing to the rest. The consultation itself is free and the figure is put in front of you before anything is booked. On speed: one customer reported getting a quote within 30 minutes of ringing and the job done the next day, which is that customer's experience rather than a turnaround anyone can promise you.
We want the outside of the house lit to match the inside. Can any of this go out there?
Outdoor lighting yes, outdoor strip no, and the reason is documentary rather than a matter of preference. Two items in the entire range carry a published IP figure - the 200W non-dimmable 24V driver at IP67 and the 100W dimmable at IP20 - and each of those describes that driver's own enclosure and nothing else: not the strip, not the profile, not the controller, not the remote, not a garden light. IP is a tested classification under IEC 60529, so a product either holds a rating or it does not. An unrated strip in an exposed position has not been assessed for one, which is a different thing from having failed. The exterior of the house is done instead with the 9W and 6W DC24V RGB+CCT garden lights and fixture work, running off the same 5-in-1 controller as everything indoors. That covers the ground most Burpengary properties actually have, since flats are 0.5% of occupied dwellings here and nearly every address is a house with a garden and steps.
This is our own house and we would rather do what we can ourselves. Where exactly does the legal line fall on a 24V install?
Part of it, and the boundary deserves stating precisely instead of being rounded off in either direction. The Electrical Safety Act 2002 (Qld) s 18(1) makes installing, altering, replacing or maintaining electrical equipment, and connecting or disconnecting supply wiring, electrical work; s 18(2)(p) and (q) then exclude certain connections and disconnections of prescribed equipment, but only where every one of four conditions is met, extra low voltage being just one of them. So 'it is only 24 volts' is not the test. What is not yours in any reading is the mains side: a driver hardwired into a circuit, any alteration to fixed wiring, anything at the switchboard - all of it requires a licensed electrician, and a business doing that work needs an electrical contractor licence as well. Luxe installs on contractor licence #90549. A licensed electrician who prefers to buy the system and fit it themselves does so under their own licence, at trade pricing.
Do you actually come out to Burpengary - and with no local track record to go on, what can we check before booking?
Yes - design, supply and installation all run to Burpengary, with the licensed electrician driving down from the only premises the business has, 5/13 Kayleigh Dr at Buderim. It is worth being blunt about what that does not mean, because somebody has to open the door to whoever arrives: there is no office, depot, showroom or crew in Burpengary, and not one job described anywhere on this page is a Burpengary job. The business has no local history here to point at, which is why the checkable credential matters more than the reputation - installation is carried out through the trade arm, Luxe Electrical Industries, holder of Queensland Electrical Contractor Licence #90549, a state register entry anyone can look up before a date is booked. The electrician behind it is Tim, whose experience the trade site and directories both put at well over a decade, working the way one customer described as 'professional, efficient, and highly knowledgeable'.
How much of our own time does this take, and does somebody have to be here for it?
That gets settled at the consultation, which costs nothing and is where the rooms are measured and the figure fixed before any date is booked. Two things are worth knowing while you decide. The business's own account of its own work is that most residential feature lighting installs are finished inside a single day - one date to clear rather than a run of them, and it is not an availability promise about your job. And unattended access is something this business has done: one customer's review records the work being completed with nobody home, and that 'you wouldn't even know tradies had been through the house' when they got back. That is one customer's account, not a standard being offered, and it names no location.
We are on the trade side of this. Can the system be bought at trade pricing and fitted under our own licence?
Yes, and it is a real path rather than a closing footnote. Electricians and builders get trade pricing, buy in bulk, and can book the same lighting consultation a householder books. The route also sidesteps the question of where the installing arm travels, because product ships anywhere in Australia regardless. Licensing answers itself here too: a licensed electrician who buys the system wires it in under their own licence, and the contractor-licence requirement applies to whoever is carrying out the work as a business. The audience is a genuine one locally - Technicians and Trades Workers are the largest single occupational group in Burpengary at 16.9% of employed residents, against 12.9% nationally, although that figure describes where people live rather than where they work. A builder using the business repeatedly across separate projects sums delivery up as 'on-time' and 'on-budget'.
Get a quote for your Burpengary project
Everything else on this page depends on one appointment, and the appointment costs nothing. Someone measures your rooms as they actually stand, decides which runs go where and how they are zoned, sizes the drivers against the whole plan rather than the first room, and hands you the figure before you are asked to commit to any of it. The one thing worth asking for is that the whole house is drawn even if a single room is going in this year - in a house you intend to keep, that is what makes the next stage match rather than nearly match. On the business's own account most residential feature lighting installs are finished inside a single day; for someone who owns the house, the value in that is a permanent job done properly the first time, not a day saved. Electricians and builders book the same consultation for trade pricing and bulk supply. Start on the contact page.
Prefer to talk? 0411 212 528